← Back to News
2026-11-22Industry Knowledge

Why Doesn't Stainless Steel Rust?

Why Doesn't Stainless Steel Rust?

Kitchen pans, bridge rails, surgical instruments — in the same humid corrosive environment, carbon steel rusts badly while stainless stays bright. Where does its rust resistance come from?

The Secret: Chromium and Passivation

Stainless steel's immunity comes from chromium (Cr). Above 10.5% Cr, the surface spontaneously forms an ultra-thin (few nm) dense chromium oxide (Cr₂O₃) film — the shield.

Three traits: dense (blocks oxygen/water like armor), self-healing (scratched chromium re-oxidizes in air — "scratch it and it still won't rust"), ultra-thin (invisible but effective).

Common Grades

304 (18-8): 18% Cr, 8% Ni — the general-purpose grade; food, tableware, chemical. Weak against chloride.

316: adds Mo 2~3% — far better chloride resistance; marine, medical, chemical.

430: 17% Cr, no Ni (ferritic) — cheap, less resistant; tableware, appliances.

Martensitic (420): heat-treatable, hard; knives.

Stainless CAN Rust

Chloride attack: pitting in seawater/brine/chlorine; surface contamination: iron dust/weld spatter causes local rust; intergranular corrosion: Cr depletion at weld HAZ (use low-C or stabilized grades); SCC: tensile stress + chloride, austenitic grades.

Stainless Steelmaking

Ultra-low-C, ultra-clean stainless demands advanced processes:

1. Carbon control: Cr carbides hurt resistance — AOD/VOD decarburization to <0.03% (ultra-low <0.02%).

2. Temperature control: high tap temps (1600~1700°C), large alloy additions — precise measurement every heat.

3. Cleanliness: strict inclusions; Ca wire feeding, soft blowing routine.

Summary

Stainless steel's brightness = chromium + the oxide film combo. Right grade, chloride protection, clean surface keep it shining. And producing qualified stainless relies on AOD/VOD refining and precise temperature control.