LF Ladle Furnace: The "Beauty Salon" of Steel
After the converter or EAF, steel often enters a "beauty salon" — the LF ladle furnace. Premium grades almost always pass through LF; it's the most common refining device.
What Is LF?
Essentially a heatable ladle: in position, lid on, argon stirring through bottom plugs, arc heating via graphite electrodes in the lid, plus slagging and alloy systems — a complete steel refining workstation.
Four Functions
1. Temperature adjustment: arc reheating at 2~4°C/min. Low tapping temp? LF recovers it; argon evens it out.
2. Composition trimming: precise alloy additions (FeSi, FeMn, Al wire) to target range — the correction step for endpoint deviations.
3. White slag refining: high-basicity CaO-Al₂O₃ white slag in reducing atmosphere for deep desulfurization and inclusion absorption. White, foaming, reducible slag = stable quality.
4. Argon stirring: throughout, for uniformity and flotation.
Temperature Rhythm
Extremely demanding: station-in measurement (decide reheating), process measurements with sampling, station-out measurement (confirm casting requirement). Typically 3~6 measurements per heat through the lid — frequent, harsh, demanding on heads and lances.
Common Issues
1. Phosphorus reversion: slag oxidation/basicity mismanaged.
2. Excessive temperature drop: improve lid insulation and heating power.
3. Inclusion excess: fix white slag or stirring intensity.
Summary
LF is steel's beauty salon — temperature, composition, white-slag refining and stirring, four-in-one. And precise temperature rhythm is its quality standard.