← Back to News
2026-11-18Industry Knowledge

Argon Stirring: Why Does Steel Need a "Breath of Air"?

Argon Stirring: Why Does Steel Need a "Breath of Air"?

Before refining and casting, nearly every heat gets argon blown through bottom porous plugs — argon stirring.

Why Stir?

1. Temperature homogenization: top-to-bottom differences of 30~50°C; stirring evens it out.

2. Inclusion flotation: rising bubbles "catch" fine inclusions (Al₂O₃) and carry them to the slag — bubble flotation.

3. Composition uniformity: mixes added alloys evenly.

4. Degassing: bubbles provide escape channels for H and N.

Why Argon?

Argon is inert — no reaction, no pollution. Air would add oxygen and create more oxide inclusions. High-purity argon (99.99%+) is standard; nitrogen is cheaper but adds N — avoid for alloy steels.

Intensity Control

Too strong: exposed steel oxidizes, slag emulsifies back into steel, splashing. Too weak: poor mixing. Ideal: surface gently "bulging and rippling" — soft blowing for settling and inclusion float; strong stirring for alloying.

Relationship with Temperature

Measure before (decide reheating/cooling) and after (confirm uniformity). Argon stirring + temperature measurement are standard partners — accurate temperature drives stirring time and intensity judgment.

Summary

Argon stirring is steel's circulation — uniform temperature, floated inclusions, mixed alloys, assisted degassing, four birds one stone. Inert gas, right intensity, with temperature — steel enters the next step in best state.